Sprayable Coarse-Grain Gypsum Primer for Direct Application over Masonry Surfaces

Overview
PPG121 is a polymer-enhanced, coarse-grained gypsum primer designed to be applied using a spray machine. It serves as a reliable base layer over masonry walls, providing high adhesion, good workability, and an ideal surface for finishing coats.

Key Features

• Applied by spraying machine for fast and even coverage

• Strong adhesion to brick or block masonry

• Easy to smooth and adjust after spraying

• Suitable for interior base preparation prior to finishing gypsum layers

Method of Use
Ensure the masonry substrate is clean and free from dust, oil, or other contaminants. Repair any cracks or structural imperfections before application.

Preparation Instructions

• Mix the gypsum powder with clean water in a 2:1 ratio (gypsum to water).

• Use a spraying machine to mix and apply the gypsum.

• Spray the prepared mixture evenly onto the surface.

• After spraying, use a trowel to smooth the surface and adjust thickness.

• Allow the gypsum to dry completely before applying any finishing layers.

Technical Data

• Color: White

• Compressive Strength: Minimum 2.5 MPa

• Initial Setting Time: ~60 minutes

• Final Setting Time: 2–3 hours

• Density: ~0.8 – 0.9 g/cm³

• Chemical Base: Hydrated gypsum with specialized additives

Coarse-Grained Base Layer Plaster for Manual Application on Masonry Surfaces

Overview
PPG513 is a coarse-grained polymer-enhanced gypsum plaster designed for use as a base layer over masonry walls. This product is ideal for manual application, providing excellent adhesion, consistent coverage, and high durability on brick or block surfaces.

Key Features

• Suitable for direct application onto masonry

• Easy to mix and apply manually

• Good surface adhesion and workability

• Sets quickly and provides a solid foundation for finishing layers

Method of Use
Ensure that the substrate is clean and free from dust, oil, and other contaminants. All surface cracks or breaks must be repaired prior to application.

Preparation Instructions

• For every 1 kg of plaster powder, add 500 grams of clean water.

• Mix thoroughly until a smooth, paste-like consistency is obtained.

• Apply the prepared mixture onto the surface using a trowel or spatula.

• Smooth the surface and adjust to the desired thickness.

• Allow the plaster to dry completely before applying any subsequent layers.

Technical Data

• Color: White

• Compressive Strength: Minimum 2.5 MPa

• Initial Setting Time: Approx. 45 minutes

• Final Setting Time: 1–2 hours

• Density: ~0.9 g/cm³

• Chemical Base: Hydrated gypsum with special additives

Fine-Grained Gypsum Plaster with Extended Workability for Final Finishing

Overview
PPG110 is a polymer-enhanced, fine-grained gypsum plaster designed specifically for final finishing over gypsum-based surfaces. Unlike standard gypsum plasters, it offers significantly extended workability time, allowing for a smoother and more controlled finish.

Key Features

• Extended workability (up to 60 minutes)

• Smooth and consistent finish

• Ideal for final coatings on gypsum-based substrates

• Easy to mix and apply

• Minimal shrinkage and good surface coverage

Surface Preparation
Ensure the substrate is gypsum-based, clean, and free of dust, oil, or any contaminants. Repair any cracks, holes, or surface damage before application.

Mixing Instructions

• Add 600 grams of clean water per 1 kilogram of PPG110 powder.

• Mix thoroughly using a mechanical mixer until a lump-free, paste-like consistency is achieved.

Application
Apply the prepared plaster with a trowel or spatula to the desired area. Smooth the surface evenly and build up to the required thickness. Let the surface dry completely before any further processing or painting.

Technical Data

• Color: White

• Compressive Strength: ≥ 3 MPa

• Initial Setting Time: ~60 minutes

• Final Setting Time: ~6 hours

• Density: ~0.9–1.0 g/cm³

• Chemical Base: Hydrated gypsum with specialized additives

Flexible, Polymer-Enhanced Gypsum for Cement-Based Surfaces

Overview
PPG313 Gypsum Gipton is a soft-grained, polymer-modified gypsum plaster designed specifically for application over cement-based substrates. Unlike traditional gypsum, it offers excellent adhesion to smooth surfaces and does not crack after drying. It is ideal for interior finishing layers where flexibility, smoothness, and crack resistance are essential.

Key Features

• Compatible with cement-based and smooth surfaces

• Crack-resistant after drying

• Easy to mix and apply

• Fast initial setting with a durable finish

• Lightweight formula with high coverage

Surface Preparation
Make sure the substrate is clean, dry, and free from dust, grease, oil, or loose particles. Confirm that the surface is cement-based. Repair any cracks or damage prior to application.

Mixing Instructions

• Add 600 grams of clean water per 1 kilogram of Gypsum Gipton powder.

• Mix thoroughly until a smooth, lump-free, paste-like consistency is achieved.

Application
Apply the prepared mixture evenly using a trowel or spatula. Smooth out the surface to the desired thickness. Allow to dry completely before further finishing.

Technical Data

• Color: White

• Compressive Strength: ≥ 5 MPa

• Initial Setting Time: ~10–15 minutes

• Final Setting Time: ~30 hours

• Density: ~0.9 g/cm³

• Chemical Base: Hydrated gypsum with specialized additives