Introduction of Colored External Mortar ppc

The PPC External Mortar is a semi-soft cement base coating that is used as a coating on exterior and interior walls. By adding another additive to the final coating formula, water resistance formula is produced. This product is used on prefabricated concrete surfaces, smooth external surfaces covered with cement mortar or preferably surfaces covered with lining mortar.

Preparation Instructions

The contents of the bag are mixed with 5 liters of clean water in a blender and stirred. After complete mixing, wait for 10 minutes and stir again for a short time. The time to use mortar is 2 to 4 hours depending on the ambient temperature.

Standard:

The product complies with International Standard EN998-1 category CR

Description
Reviews (0)

Description

Method of Use

The external final coating is applied by spraying with a pump or by hand (with a trowel) on the under-work surface that is clean and free of sticky, oily and scum materials. Excess mortar is removed from the surface and returned to the container. If needed, it is possible to apply an additional layer on top of the first layer by considering a drying period of one day. If there are holes or a hairline crack on the surface, fill them with the external final coating and next day apply the external final coating. Moisturize the external final coated mortar with a little spray of water on the next day of applying.