Description

PTC Colored Polymer Coating

Versatile, Durable, and Decorative Finish for Interior & Exterior Walls

Overview
PTC Colored Polymer is a decorative and protective coating designed for both interior and exterior surfaces. It is ideal for application on cement, concrete, brick, and plaster walls. Thanks to its modified polymer-cement composition, this product enables the creation of aesthetically diverse and textured finishes. It not only adds beauty and texture but also improves durability and provides a cost-effective, long-lasting facade solution.

Key Features

• Suitable for both interior and exterior walls

• Can be applied to cement, concrete, brick, and plaster

• Available in a wide range of colors

• Resistant to cracking and environmental factors

• Lightweight and economical

• Long-lasting aesthetic finish

Surface Preparation
Ensure the substrate is solid, clean, and smooth. Remove any dust, oil, or loose materials. Lightly moisten the surface if necessary.

Mixing Instructions

• Mix 26% clean water by weight with the powdered polymer mortar.

• Use a mechanical mixer to ensure a uniform blend.

• Stir until a smooth, paste-like consistency is achieved.

Application
Apply the prepared mixture evenly using a trowel or suitable finishing tool to achieve the desired texture or decorative pattern. Avoid delays, as the mixture should be used within 40 minutes at 20°C. Drying time may vary with ambient conditions.

Technical Data

• Color: Wide range of color options available

• Compressive Strength: > 0.1 MPa

• Adhesion Strength: ≥ 0.7 MPa

• Workability Time: ~40 minutes at 20°C

• Initial Drying Time: ~24 hours

• Final Curing Time: ~7 days

• Density: ~1.6 g/cm³

• Chemical Base: Modified polymer-cement